CR708 common rail injector and pump test bench

System Application:

The system is suitable for detection of BOSCH, DENSO, DELPHI and

SIEMENS common rail pump and injectors. Such as CP1, CP2.CP3, HP3 series injector pump and the type of Electromagnetic injectors, It also can test 6 common rail injectors in one time.

Technical parameters

1, Main motor speed	0-4000 r / min can be adjustable.
2, Motor power	7.5KW, 11KW, 15KW, 18.5KW optional.
3, Fuel Injector open voltage Control range	12V, 80V, 150V Control accuracy: phase adjustment
4, Injector opening frequency Control	0-1000HZ Control accuracy: 1HZ
5, Fuel Injector Hold Time Control	0-65535us
6 Delivery Oil CountControl Control accuracy	0-1000 times 1 times
7, Fuel pressure control Control Control accuracy	0-2000bar 1bar
8, Electronic power	3 PHASE 380V or 3 PHASE 220V

● Introduction
High pressure common rail injection pump test bench is the professional test bench for common rail system.It can test common rail pump,injector and pipe at the same time.
1. Pump test: pump flow, pressure, PVC valve working state and its own leakage.
2. Injector test: seal of the injector, injection and return quantity in pre-injection, idle, emissions and full load working condition
3. It can test pressure sensor and DRV valve.
4. Support brand: BOSCH,DELPHI,DENSO,SIEMENS.
5. With the standard data of each pump and injector.
6. Oil pressure displays on screen.
7. Test and judge tested piece full-automaticly.

● Technical parameters
1. Motor power: 7.5KW, 11KW, 15KW
2. Input voltage: 3 PHASE 380V, 3 PHASE 220V, 1 PHASE 110V, 1 PHASE 220V
3. Motor speed range: 0-4000RPM
4. Pressure adjustment range: 0-2000bar
5. Flow testing range: 0-600ml/1000times
6. Flow measurement accuracy:0.1ml
7. Temperature range: 40±2
8. Cooling system: fan or forced cooling (optional)

Optional Fuction
1. Single flow sensor (diesel injection and return tested in turn)